4-20mA to 0-10V Programmable Signal Isolation Amplifier

• Kind: Digital Transmitter
• Type: DC Transmitter
• Phase: Single
• Wire-Assembly Type: Four-wire Transmitter
• Accuracy Grade: 0.1G
• Certification: CE
• Model NO.: JSD TA-A1001S
• Customized: Non-Customized
• Input: 4-20mA0-5V/0-10V/1-5V/0-100mv/0-20mA/0-10mA/4-20mA
• Output: 0-5V/0-10V/1-5V/0-100mv/0-20mA/0-10mA/4-20mA
• Isolation Voltage: 3000VDC
• Operating Temperature: -45~+85
• Gain Drift: 100ppm
• Non-Linearity: 0.2,0.1
• Power: 8-40VDC
• Transport Package: Bubble Bag+Waterproof Bag
• Specification: 32*8.9*14.2mm
• Trademark: jieshengda
• Origin: Shenzhen
• Production Capacity: 99999

Product Description

programmable signal Isolation amplifier 
4-20mA to 0-10V programmable signal Isolation amplifier
Quotation is not final sale price, please consult sales manager for details
JSD OI series DC signal optical isolation amplifier
MODEL:JSD TA-1001S series

JSD Technology (JSD Technology) JSD TA-A1001S series is a programmable multi-signal input and multi-signal output isolation amplifier, is the electrical insulation between the input and output analog signal transformation, amplification, isolation, remote transmission of small instruments and equipment, receive a variety of analog voltage and current input of the field instrument, through the isolation transmitter signal transformation acquisition, in the form of standard analog signal or The special analog signal specified by the user is transmitted to the control room, PLC, PC and DCS system.
JSD  TA-A1001S series program the input signal or output signal through the dip switch, adjust the signal required by the front and rear equipment at any time, the input, output and working power supply of the output product are isolated from each other, the isolation voltage is as high as 3KVDC, and it is widely used in the industrial field of power isolation measurement and control, power monitoring, electronic equipment, analog isolation and acquisition. The isolator adopts optocoupler isolation technology, which has better anti-EMC electromagnetic interference capability than the electromagnetic isolation transmitter, and meets the isolation needs of the industrial site. The installation method adopts the international standard DIN35mm design, which is convenient for users to directly connect and use. (For single signal isolation transmitter, please select JSD TA-1001 series) For more technical information, please visit Shenzhen Jieshengda Technology Co., LTD.
Parameter definition(YNMT)·

Features:
Ultra-thin volume, low cost, standard DIN35mm rail mounting method
Three-terminal isolation (input, output, working power supply isolation)
Own patented technology
High precision grade (0.1,0.2,0.5% F.S)
High linearity (0.1,0.2% F.S)
High isolation voltage (3000VDC/60S)
Very low temperature drift (100PPM/ºC)
Industrial temperature range (-45~+85 ºC)
Reliable product performance (MTBF > 500,000 hours)
Working power supply (5/12/15/24/9-36V)VDC and other single power supply
International standard signal selection (0-3.3V/0-5V/0-10V/0-20mA/4-20mA)
Passed CE Certificate
Applications:
DC current/voltage signal isolation, conversion and amplification
Analog signal ground interference suppression
4-20mA/0-20mA/0-10mA/0-5V/0-10V/1-5V etc. signal isolation and conversion
Instrumentation and sensor signal transceiver
Industrial Power isolation and control
Analog signal data isolation, acquisition and conversion
Industrial field signal isolation and Remote lossless transmission
Power monitoring, medical equipment isolation barrier

Product Selection Parameter List:
signal  input code :		Power supply code:	output signal code:
0-3.3V		8-40VDC	4-20mA
0-5V			0-20mA
0-10V			0-3.3V
0-20mA			0-5V
4-20mA			0-10V

 Selection Example:
Example 1: Signal input:0-5V;signal output: 0-5V; power supply:5VDC; Model:JSD OI-V1-P4-VO4
Example 2:Signal input:4-20mA;signal output :4-20mA;power supply:24VDC;Model:JSD OI-I4-P1-IO1

Electrical Characteristics:  

Signs	Item			Test condition	Min	Typ.	Max	Units
Isolation characteristics	Isolation voltage			AC,50Hz,(Tested for 1 minute humidity<70% ,leakage current < 1mA,)		3000		V(rms)
Transmission characteristics	Gain					1		V/V
	Gain drift					100		ppm/ºC
	Gain adjustment potentiometer					50		kΩ
	Zero adjustment potentiometer					2		kΩ
	Non-linearity					0.1	0.2	%FSR
Input characteristics	Signal input		Voltage		0	5	10	V
			Current		0	10	20	mA
	Input offset voltage					2	5	mV
	Input impedance		Voltage		0.3	1		M
			Current			250	1000	Ω
Output  characteristics	Signal output		Voltage		0		10	V
			Current		0	10	20	mA
	Load capacity		Voltage	Vout=10V		2		kΩ
			Current		0	500		Ω
	Frequency Response			-3DB		1		KHz
	Response time					≤ 1		mS
	Signal output ripple			Unfiltered		10	20	mVRMS
	Voltage signal drift			-45~+85 Operating temperature			0.2	mV/ºC
Power input characteristics	Power supply	Voltage			8	24	40	VDC
		Power loss				0.5	1	W
		Range			-10		+10	%
Other  characteristics	Soldering temperature			Solder from the shell 1.5mm, 10S			300	ºC
	Operating temperature				-45		85	ºC
	storage temperature				-55		105	ºC
	Weight				100			g
Note 2:	Normal load ≤ 350Ω, if required load 650Ω, please note when ordering .

Pin function:

Pin	Function Description	Pin	Function Description	Package
1	Power +	5	Signal OUT +	International Standard DIN35 Rail Mounting
2	Power -	6	Signal OUT -
3	Signal In +	7	Signal OUT +
4	Signal In -	8	Signal OUT -

Wiring diagram:

PCB board layout diagram:

 

Notes:
1,Please read the user manual carefully before using. If any question please contact our technical support department.
2,Please do not use this product in hazardous area. The power supply of this product should be 24VDC power source. It is forbidden to use 220VAC power supply.
3,Calculating from the date of delivery, during normal use of the product, any quality problems are free repair or replacement by Company during 3 years warranty,
4,To avoid invalid, or any failure, users disassemble this product is forbidden
5,the product is strictly forbidden demolish without permission for not damage
6,All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
7,In this datasheet, all the test methods of indications are based on corporate standards.