4-in-4-out Passive Two-Wire 4-20mA Isolation Amplifier

• Kind: New-Type Transmitter
• Type: DC Transmitter
• Phase: Single
• Wire-Assembly Type: Two-wire Transmitter
• Accuracy Grade: 0.1G
• Certification: CE
• Model NO.: JSD TAW-4004-100L
• Customized: Non-Customized
• Input: 4-20mA/0-20mA
• Output: 0-20mA/4-20mA
• High Isolation Voltage: 3000VDC/60s
• High Accuracy: (0.1% F.S, 0.2% F.S)
• Low Temperature Drift: 35ppm
• High Linearity: (0.1% F.S)
• Transport Package: Bubble Bag+Waterproof Bag
• Specification: 94*47*25.5mm
• Trademark: jieshengda
• Origin: Shenzhen
• Production Capacity: 99999

Product Description

4-input-4-output passive two-wire 4-20mA isolation amplifier 
JIESHENGDA JSD TAW-X00X Series Analog 4-20mA Signal isolation amplifier
MODEL:JSD TAW-4004-100L
4-input-4-output passive two-wire 4-20mA isolation transmitter
Features:
Small size, low cost, No correction directly use
Multiple port isolation
4-input-4-output mutual isolation between channels
High accuracy (0.1% F.S, 0.2% F.S)
High linearity (0.1% F.S)
High isolation voltage (3000VDC/60S)
Low temperature drift (35PPM/ºC)
Low impedance (voltage drop <3V, 20mA)
Wide Industrial class operation temperature (-45~+85ºC)
Wide voltage input (7.5V~32V)
High reliability (MTBF>50Wan hour)
Passed CE Certificate
International standard signal input and output (4-20mA/0-20mA)
Application:
DC current/voltage signal isolation, conversion and amplification
Analog signal ground interference suppression and analog isolation, acquisition
4~20mA/0~20mA sensor signal isolation, transformation and signal distribution conversion
Instrumentation and sensor signal transceiver
Two-wire primary/secondary instrumentation signal acquisition and isolation
Power isolation monitoring industrial site
Analog signal data isolation, acquisition, conversion, and distance transmission
Industrial field signal isolation and conversion, and distance transmission without distortion
Power monitoring, medical equipment isolation barrier
Overcome inverter, large motors, power equipment, acquisition systems, DCS and PLC Field interference
General Description:
JIE Sheng Da Technology JSD TAW-4004-100L two-wire passive Four-channel analog signal isolation transmitter is a Signal Conditioner with electrical insulation between input and output, it can receive a variety of analog signal from the field instrument, and transmit a standard output signal or user-specified special signal to the control room,PLC,PC or DCS system. The product is isolated between input output and channel, the isolated voltage is up to 3000VDC .It is widely used in the industrial measurement systems, medical electronic equipment, electrical equipment etc. Adopting high efficiency electromagnetism isolation technology to achieve signal isolation, it is available to keep high output accuracy, good linearity and low temperature drift.
For 1-in-1-out isolated transmitter/2-in-2-out isolated transmitter/3-in-3-out isolated transmitter please purchase JSD TAW-1001-100L series; JSD TAW-2002-100L series; JSD TAW-3003-100L series;

Selections and Definitions:

Product Selection Parameter List:
Signal Input:	Output Signal:
Current(mA)	Current(mA)
4-20mA	4-20mA
0-20mA	0-20mA

Electrical Characteristics:

Signs	Item		Test Condition	Min	Typ.	Max	Units
Isolation characteristics	Isolation voltage		AC,50Hz,(Tested for 1 minute humidity<70% ,leakage current < 1mA,)		3000		V(rms)
	Insulation resistance		500VDC(input/output)		100		MΩ
Transmission characteristics	Gain drift				±35	±50	ppm/ºC
	Non-linearity				±0.1	±0.2	%FSR
	Output voltage range			10	24	30	VDC
	Signal input	current		4	20	30	mA
	Signal output Output oououtoutput	current		4		20	mA
	Load capacity	current	RL≤(Us-5)/0.02 Us: Loop power supply voltage		250		Ω
	Frequency Response		(Small-signal bandwidth)Io=20mA		50		Hz
	Signal output ripple				5	10	mVRMS
Other characteristic	operating temperature			-45		85	ºC
	storage temperature			-55		105	ºC
	weight				136		g
	size		115*100*23				mm

Selection Example:
input 1:4-20mA; output 1:4-20mA; Input 2:4-20mA;output 2:4-20mA;Input 3:4-20mA;output 3:4-20mA; Input 4:4-20mA; output 4:4-20mA;Model: JSD TAW-4004-100L
Pins Function Description:

Outputting types	Pin	Function	Pin	Function	Storage
Four-channel passive 4-20mA current output	1	Signal input 1 +	9	Current output 1+	Standard DIN35 rail mounting
	2	Signal input 1 -	10	Current output 1-
	3	Signal input 2+	11	Signal output 2+
	4	Signal input 2-	12	Signal output 2-
	5	Signal input 3+	13	Signal output 3+
	6	Signal input 3-	14	Signal output 3-
	7	Signal input 4+	15	Signal output 4+
	8	Signal input 4-	16	Signal output 4-

Notes:
1,Please read the user manual carefully before using. If any question please contact our technical support department.
2,Please do not use this product in hazardous area. The power supply of this product should be 24VDC power source. It is forbidden to use 220VAC power supply.
3,Calculating from the date of delivery, during normal use of the product, any quality problems are free repair or replacement by Company during 3 years warranty,
4,To avoid invalid, or any failure, users disassemble this product is forbidden
5,the product is strictly forbidden demolish without permission for not damage
6,All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
7,In this datasheet, all the test methods of indications are based on corporate standards.

Copyright:
Copyright © 2018 Shenzhen Jieshengda Technology Co., Ltd.
Without the prior written permission of the company, any content in this manual may not be copied, distributed, translated or transmitted in any form or method (electronic or mechanical).
Including photocopying, recording or storage in any information storage and retrieval system. This manual is subject to modification or update without notice.
trademark
All other trademarks and copyrights belong to their respective owners