high accuracy isolation amplifier transmitter(AC power supply series)
1-input-1-output high accuracy isolation amplifier transmitter(AC power supply series)
MODEL:JSD TAM-1501
Features:
Small size, low cost, international standards DIN35mm rail mounting
three-port isolation (input, output and power supply )
1-input- 1-output ,isolated between channels
High accuracy (0.1% F.S, 0.2% F.S)
High linearity (0.1% F.S)
High isolation voltage (3000VDC/60S)
Low temperature drift (35PPM/ºC)
Wide Industrial class operation temperature (-45~+85ºC)
High reliability (MTBF>50 Wan hour)
Power supply:220VAC or 5VDC/12VDC/15VDC/24VDC
International standard signal input and output (0~5V/0~10V/4~20mA/0~20mA/0~±10V/0~±20mA etc.)
Applications:
DC current/voltage signal isolation, conversion and amplification
Analog signal ground interference suppression and analog isolation, acquisition
4~20mA/0~±10V/0~±20mA sensor signal isolation, transformation and signal distribution, conversion
Instrumentation and sensor signal transceiver
Power isolation monitoring industrial site
Analog signal data isolation, acquisition, conversion, and long-distance transmission
Industrial field signal isolation and conversion, and long-distance transmission without distortion
Power monitoring, medical equipment isolation barrier
Overcome inverter, large motors, power equipment, acquisition systems, DCS and PLC Field interference
General Description:
JieShengda Technology(JSD)JSD TAM-1501 series high accuracy isolation transmitter adopts 220VAC power supply, it is a signal conditioner with electrical insulation between input and output. It can receive a variety of analog signal from the field instrument, and transmit a standard output signal or user-specified special signal to the control room,PLC,PC or DCS. The product is isolated between power supply, input and output, the isolated voltage between them is up to 3000VDC .it is five-port isolation, It is widely used in the industrial measurement systems, power, chemical, aerospace control, environmental protection, oil exploration, analog signal isolation, transmission, transformation, distribution and collection .etc. Adopting high efficiency electromagnetism isolation technology to achieve signal isolation, transmission, transformation, distribution and acquisition, it is available to keep high output accuracy, good linearity and low temperature drift. Suitable for using in vibration, damp industrial field, the standard DIN35mm rail mounting for easy user installation. DC power supply are another series products , special can customize
| Product Selection Parameter List: |
| signal input code: |
Power supply code: |
output signal code: |
| Voltage(VDC) |
Current(mA) |
5: |
220VAC |
1: |
4~20mA |
| 1: |
0~5V |
A: |
0~1mA |
|
|
2: |
0~20mA |
| 2: |
0~10V |
B: |
0~10mA |
|
|
3: |
-20~+20mA |
| 3: |
0~75mV |
C: |
0~20mA |
|
|
4: |
0~5V |
| 4: |
0~2.5V |
D: |
4~20mA |
|
|
5: |
0~10V |
| 5: |
0~±5V |
E: |
0~±1mA |
|
|
6: |
1~5V |
| 6: |
0~±10V |
F: |
0~±10mA |
|
|
7: |
0~±5V |
| 7: |
0~±100mV |
G: |
0~±20mA |
|
|
8: |
0~±10V |
| U: |
User-defined |
U: |
User-defined |
U: |
User-defined |
U: |
User-defined |
Selection Example:
Example 1:Signal Input:4-20mA;Signal Output:4-20mA;Power Supply:220VAC;Model:JSD TAM-1501-D51
Example 2:Signal Input:0-3.3VDC;Signal Output:0-20mA;Power Supply:220VAC;Model:JSD TAM-1501-U52
Example 3:Signal Input:0-10VDC;Signal Output:4-20mA; Power Supply:220VAC;Model:DIN35 JSD TAM-1501-251
Example 4:Signal Input:0-±5VDC;Signal Output:0-±10VDC;Power Supply:220VAC;Model:JSD TAM-1501-558
Example 5:Signal Input:0-12VDC;Signal Output:0-5VDC;Power supply:220VAC;Model:JSD TAM-1501-U54
Electrical Characteristics:
| Signs |
Item |
Test Condition |
Min |
Type |
Max |
Units |
Isolation
characteristics |
Isolation voltage |
AC,50Hz,(Tested for 1 minute humidity<70%,
leakage current < 1mA) |
|
2500 |
|
V(rms) |
Transmission
characteristics |
Gain error |
|
|
1 |
|
V/V |
| Gain drift Non-linearity |
|
|
35 |
|
ppm/ºC |
| Non-linearity |
|
|
0.1 |
0.2 |
%FSR |
| Input characteristics |
Signal input |
voltage |
|
0 |
|
15 |
V |
| current |
|
0 |
|
30 |
mA |
| Input offset voltage |
|
|
2 |
5 |
mV |
| Input impedance |
voltage |
|
|
1 |
|
M |
| current |
|
|
|
50 |
Ω |
| Output characteristics |
Signal output |
voltage |
|
-10 |
|
10 |
V |
| current |
|
-20 |
|
20 |
mA |
| Load capacity |
voltage |
Vout=10V |
|
2 |
|
kΩ |
| current |
|
0 |
350 |
500 |
Ω |
| Signal output ripple |
Unfiltered |
|
10 |
20 |
mVRMS |
Power
input characteristics |
Power supply |
Voltage |
|
90 |
220 |
264 |
VDC |
| Power loss |
|
|
1.5 |
|
W |
| Other characteristics |
operating temperature |
|
-45 |
|
85 |
ºC |
| storage temperature |
|
-55 |
|
105 |
ºC |
| Weight |
|
|
148 |
|
g |
| Note: |
Normal load ≤ 350Ω, if required load 500Ω, please note when ordering . |
Pin Function Description:
| Signal Type |
Pin |
Function Description |
Pin |
Function Description |
Package |
1-input-
1-output Voltage /Current |
1 |
Power supply L |
9 |
Signal Output + |
International Standard DIN35
Rail Mounting |
| 2 |
Signal Input + |
10 |
Signal Output - |
| 3 |
(NC) |
11 |
(NC) |
| 4 |
(NC) |
12 |
(NC) |
| 5 |
Power supply N |
13 |
(NC) |
| 6 |
Signal Input - |
14 |
(NC) |
| 7 |
(NC) |
15 |
(NC) |
| 8 |
(NC) |
16 |
(NC) |
Application Wiring Diagram:
Product Dimensions:
Notes:
1,Please read the user manual carefully before using. If any question please contact our technical support department.
2,Please do not use this product in hazardous area.
3,NC" pin must not be connected to any external circuit, otherwise it will damage the product itself;
4,Calculating from the date of delivery, during normal use of the product, any quality problems are free repair or replacement by Company during 3 years warranty;
5,the product is strictly forbidden demolish without permission for not damage;
6,All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
7,In this datasheet, all the test methods of indications are based on corporate standards.
Copyright:
Copyright © 2018 Shenzhen Jieshengda Technology Co., Ltd.
Without the prior written permission of the company, any content in this manual may not be copied, distributed, translated or transmitted in any form or method (electronic or mechanical).
Including photocopying, recording or storage in any information storage and retrieval system. This manual is subject to modification or update without notice.
trademark
All other trademarks and copyrights belong to their respective owners
Audited Supplier 
){kind=link}