Speed sensor signal isolation amplifer
Speed sensor signal isolation transmitter
MODEL:JSD TAS-1001D
https://jieshengdakj.en.made-in-china.com/product-list-1.html
Features:
Low cost, thin design, international standards DIN35mm rail mounting
Four-port isolation (input, output and power supply )
Passed CE Certificate
High accuracy (0.1% F.S, 0.2% F.S)
High linearity (0.1% F.S),
High isolation voltage (3000VDC/60S)
Low temperature drift (80PPM/ºC)
Industrial class operation temperature (-45~+85ºC)
Ultra-wide range power supply design (9-36VDC single power)
International standard signal input (0-200KHz/0-100KHz/0-50KHz/0-20KHz/0-10KHz/0-5KHz etc.)
International standard signal output(0-3.3V/ 0-5V/0-10V/1-5V/2-10V/0-10mA/0-20mA/4-20mA etc.)
Application:
Converting the square wave, sine wave, sawtooth ,wave into international standards analog signals
Converting unit pulse signal into DC voltage (current) signal
Signal ground interference suppression and analog isolation, acquisition, conversion, and long
-distance transmission
Industrial signal isolation and long-distance transmission without distortion
Instrumentation and sensor signal transceiver
Motor speed monitoring and testing
Power monitoring and signal acquisition
Overcome interference and analog signal acquisition between various devices, isolation,
transformation and long-distance transmission
Monitoring and measuring various frequency pulse signal equipment
Features:
Direct input of speed sensor signal, shaping and adjusting square wave signal
Sine wave, sawtooth signal input, square wave signal output
200mV peak weak signal amplification and shaping
Does not change the original waveform frequency, fast response speed
Three-terminal isolation (input, output, working power supply isolation)
High isolation voltage (3000VDC/60S)
Working power supply: 5V, 12V, 15V or 24V DC single power supply
Low cost, small size, easy to use, high reliability
International standard DIN35 rail installation
Industrial temperature range (-45~+85 ºC)
Reliable product performance (MTBF > 500,000 hours)
Application:
High speed data transmission between TTL and PLC
Signal transmission between frequency converter pulse signal and PLC controller
Encoder differential signal isolation, acquisition and transformation
Encoder differential signal to 24V square wave pulse
Servo encoder differential signal transmission to PLC
Pulse signal amplification and shaping
All kinds of equipment ground interference suppression
Motor speed monitoring system
Speed measurement and alarm
Signal remote transmission without distortion
Motor speed measurement system(YNMT)·
General Description:
JSD TAS-1001 series isolation amplifer is the speed sensor, sine wave, sawtooth wave signal or weak waveform signal isolation conversion and input frequency is completely consistent with the signal, the instrument can shape the waveform, enlarge, remote distortion free transmission function. JSD TAS-1001 series includes applications in the microprocessor system TTL and PLC data high-speed transmission conversion interface, motor digital photoelectric encoder, frequency converter pulse signal and PLC controller signal transmission, data input and output conversion interface, pulse signal amplification and shaping, motor automatic control applications and other related fields. JSD TAS-1001 series internal SMD patch process, creepage distance can make the product input, output, working power isolated from each other, the isolation voltage up to 3000VDC, can effectively inhibit the industrial control system in the complex field environment of strong current and strong magnetic field interference, for the industrial automation control system escort.
JSD TAED-1001 series one in one out speed isolation amplifer adopts new optocoupler isolation technology, which has stronger anti-EMC electromagnetic interference characteristics than magnetoelectric isolation transmitter, no adjustment, small temperature flutters and good linearity, suitable for vibration and humid industrial sites. International standard DIN35mm guide rail installation, convenient for users to directly connect the installation features.(YNMT)·
| Product Selection Parameter List: |
| |
|
| |
|
|
|
| 1: |
Positive and negative signal input,
Peak-to-peak value of sine wave input amplitude(VP-P):200mV~50V |
W: |
8-32VDC |
1: |
Output level 0-5V |
|
| 2: |
Single-ended signal input, amplitude peak-to-peak value,(VP-P):5V |
1: |
24VDC |
2: |
Output level 0-12V |
|
| 3: |
Single-ended signal input, amplitude peak-to-peak value,(VP-P):12V |
2: |
15VDC |
3: |
Output level 0-24V |
|
| 4: |
Single-ended signal input, amplitude peak-to-peak value,(VP-P):24V |
3: |
12VDC |
4: |
Open collector output |
|
| |
|
4: |
5VDC |
|
|
|
| U: |
User-defined |
U: |
User-defined |
U: |
User-defined |
|
| Note: |
When ordering ,please determine input,output and power , special can be customized |
|
Product selection examples:
Example 1: Input: speed sensor, sine wave VP-P: 200mV~50V; Power supply: 24V; Output: 0-5V level; Product Model: JSD TAS-1001S-111
Example 2: Input: 0-5V level; Power supply: 24V; Output: 0-24V level; Product Model: JSD TAED-1001-213
Application Wiring Diagram:
Dimensions:
Notes:
1,Please read the user manual carefully before using. If any question please contact our technical support department.
2,Please do not use this product in hazardous area. The power supply of this product should be DC power source. It is forbidden to use 220VAC power supply. ''NC" pin must not be connected to any external circuit, otherwise it will damage the product itself;
3,This product layout dimension are "mm" and "inch" as the unit, within "[]" are inch;
4,Calculating from the date of delivery, during normal use of the product, any quality problems are free repair or replacement by company during 3 years warranty,
5,the product is strictly forbidden demolish without permission for not damage
6,All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
7,In this datasheet, all the test methods of indications are based on corporate standards.
Copyright:
Copyright © 2018 Shenzhen Jieshengda Technology Co., Ltd.
Without the prior written permission of the company, any content in this manual may not be copied, distributed, translated or transmitted in any form or method (electronic or mechanical), including photocopying, recording or storing in any information storage and retrieval system. This manual is subject to modification or update without notice.
Trademark
All other trademarks and copyrights belong to their respective owners.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}