1-in-1-out AC Current Voltage 0-220VAC Signal to DC Current Voltage 4-20mA/0-10V Signal Isolator

• Customization: Available
• After-sales Service: Contact Jieshengda Technology
• Warranty: 3 Years
• Model NO.: JSD TAE-1001D
• Output: 4-20mA/0-20mA/0-10mA/0-5V/0-10V
• Power: 5V/12V/15V/24V
• High Accuracy: 0.1% F.S,0.2% F.S
• Isolation Voltage: 3000VDC/60s
• Transport Package: Bubble Bag+Waterproof Bag
• Specification: 94*25*41
• Trademark: jieshengda
• Origin: Shenzhen. China
• Production Capacity: 9999

Product Description

Features:
Small size, low cost, Standards DIN35mm rail mounting
Three-port isolation (input, output and power supply)
High accuracy (0.1% F.S,0.2% F.S,)
High linearity (0.2% F.S)
High isolation voltage (3000VDC/60S)
Low temperature drift (35PPM/ºC)
Wide Industrial class operation temperature (-45~+85ºC)
High reliability (MTBF>50 Wan hour)
Power supply (5VDC/12VDC/15VDC/24VDC etc. single power supply)
International standard signal input and output (0~5V/1~5V/0~10V/4~20mA/0~20mA etc. )
Application:
AC/DC current/voltage signal isolation, conversion and amplification
Industrial field signal isolation and conversion, and long-distance transmission without distortion
Analog signal ground interference suppression
Analog signal isolation conversion and amplification
Instrumentation and sensor signal transceiver
Power isolation monitoring industrial site
Power monitoring, medical equipment isolation barrier
Overcome the interference between equipment

 

General Description:
JieShengDa Technology JSD TAE-1001 series 1-in-1-out AC signal isolation transmitter is a signal conditioner with electrical insulation between input and output. It can receive a variety of AC voltage/current signal from the field instrument, and transmit a standard output signal or user-specified special signal for a variety of instrumentation. The product is isolated between power supply, input and output, the isolated voltage between them is up to 3000VDC .It is widely used in the industrial measurement systems, medical electronic equipment, electrical equipment etc. This signal isolation transmitter adopt magnetic isolation technology to isolate/ inspect and monitor the AC voltage signal, this product is small size, low power consumption, high precision. There are single-phase, three-phase three-wire and three-phase four-wire etc.. All outputs of the multiplexer are isolated from each other and can be used flexibly. Magnetic isolation compared to optical isolation transmitter has characteristics of higher output accuracy and stability, low temperature characteristics and good linearity, its using international standard DIN35mm rail mounting for easy user installation.

Product Selection Parameter List:
signal  input code :				Power supply code:		output signal code:
voltage input code		current input code		1:	24VDC	1:	4~20mA
1:	0~1VAC	A:	0~20mAAC	2:	15VDC	2:	0~20mA
2:	0~10VAC	B:	0~100mAAC	3:	12VDC	3:	0-10mA
3:	0~100VAC	C:	0~250mAAC	4:	5VDC	4:	0~5V
4:	0~120VAC	D:	0~500mAAC	5:	220VAC	5:	0~10V
5:	0~220VAC	E:	0~1000mAAC			6:	1~5V
6:	0~380VAC	F:	0~2000mAAC
		G:	0~5000mAAC
U:	User-defined	U:	User-defined	U:	User-defined	U:	User-defined

Signs	Item				Test Condition		Min	Type	Max	Units
Isolation characteristics	Isolation voltage				AC,50Hz,(Tested for 1 minute humidity<70%, leakage current < 1mA)			2500		V(rms)
Transmission Characteristics	Gain							1		V/V
	Gain drift						<100			ppm/ºC
	Non-linearity							0.1	0.2	%FSR
Input Characteristics	Signal input		voltage				0	220	400	VAC
			current				0		5	AAC
	Input offset voltage							2	5	mV
Output Characteristics	Signal output			voltage			0		10	V
				current			0		24	mA
	Load capacity			Voltage	Vout=10V			2		kΩ
				current			0	300		Ω
	Signal output ripple				Unfiltered			10	20	mVRMS
	Response time						<300			mS
Power Supply Characteristics	Power supply	Voltage					3.3	12	24	VDC
		Power loss							2	W
		Rage					-10		+10	%
Others  Characteristics	Operating temperature						-45		85	ºC
	Storage temperature						-55		105	ºC
	Weight							60		g
Note:	Normal load ≤ 350Ω, if required load 500Ω, please note when ordering