1-Input-4-Output Active High Accuracy Isolation Amplifier

• After-sales Service: Contact Jieshengda Technology
• Warranty: 3 Years
• Input: 0~5V/0~+/-10V/4~20mA/0~+/-20mA/0~100mv
• Output: 0~5V/0~+/-10V/4~20mA/0~+/-20mA/0~100mv
• Power: 5V/12V/15V/24VDC
• Isolation Voltage: 3000VDC/60s
• Model NO.: JSD TAM-1004
• Operation Temperature: -40~+85
• High Accuracy: 0.1% F.S, 0.2% F.S
• Transport Package: Bubble Bag+Waterproof Bag
• Specification: 115*100*22.5mm
• Trademark: jieshengda
• Origin: Shenzhen. China
• Production Capacity: 9999

Product Description

1-input- 4-output active high accuracy isolation  amplifier
MODEL:JSD TAM-1004
Features:
Small size, low cost, international standards DIN35mm rail mounting, Passed CE Certificate
Six-port isolation (input, output and power supply )
1-input-4-output ,isolated between channels
High accuracy (0.1% F.S, 0.2% F.S)
High linearity (0.1% F.S)
High isolation voltage (3000VDC/60S)
Low temperature drift (35PPM /ºC)
Wide Industrial class operation temperature (-45~+85ºC)
High reliability (MTBF>50 Wan hour)
Power supply (5VDC/12VDC/15VDC/24VDC single power supply options)
Standard signal input and output (0-5V/1-5V/0-±10V/4-20mA/0-±20mA/0-10mA/0-100mV etc. optional)
Application:
DC current/voltage signal isolation, conversion and amplification
Analog signal ground interference suppression and analog isolation, acquisition
4-20mA/0-20mA/0-5V/1-5V/0-10V/0-±10V/0-±20mA sensor signal isolation, transformation and signal distribution, conversion
Instrumentation and sensor signal transceiver
Power isolation monitoring industrial site
Analog signal data isolation, acquisition, conversion, and long-distance transmission
Industrial field signal isolation and conversion, and long-distance transmission without distortion
Power monitoring, medical equipment isolation barrier
Overcome inverter, large motors, power equipment, acquisition systems, DCS and PLC Field
General Description:
JIE Sheng Da Technology JSD TAM-1004 active precision isolation transmitter is a Signal Conditioner with electrical insulation between input and output. It can receive a variety of analog signal from the field instrument, and transmit a standard output signal or user-specified special signal to the control room,PLC,PC or DCS. The product is isolated between power supply, input and output, the isolated voltage between them is up to 3000VDC .It is widely used in the industrial measurement systems, medical electronic equipment, electrical equipment etc. Adopting high efficiency electromagnetism isolation technology to achieve signal isolation, it is available to keep high output accuracy, good linearity and low temperature drift.  Suitable for using in vibration, damp industrial field, the standard DIN35mm rail mounting for easy user installation.
Selections and Definitions:

Product Selection Parameter List:
signal input code:				Power supply code:		output signal code:
Voltage(VDC)		Current(mA)		1:	24VDC	1:	4-20mA
1:	0-5V	A:	0-1mA	2:	15VDC	2:	0-20mA
2:	0-10V	B:	0-10mA	3:	12VDC	3:	-20-+20mA
3:	0-75mV	C:	0-20mA	4:	5VDC	4:	0-5V
4:	0-2.5V	D:	4-20mA			5:	0-10V
5:	0-±5V	E:	0-±1mA			6:	1-5V
6:	0-±10V	F:	0-±10mA			7:	0-±5V
7:	0-±100mV	G:	0-±20mA			8:	0-±10V
U:	User-defined	U:	User-defined	U:	User-defined	U:	User-defined

Selection Example:
Example 1:Signal Input 1:4-20mA;Signal Output 1:4-20mA;Signal Output 2:4-20mA;Signal Output 3:4-20mA;Signal Output 4:4-20mA;Power Supply:24VDC;Model:JSD TAM-1004-D11

Example 2:Signal Input 1:0-10VDC;Signal Output 1:0-5VDC;Signal Output 2:0-5VDC;Signal Output 3:0-5VDC;Signal Output 4:0-5VDC;Power Supply:5VDC;Model:JSD TAM-1004-244

Example 3:Signal Input 1:0-10VDC;Signal Output 1:0-5VDC;Signal Output 2:0-5VDC;Signal Output 3:4-20mA;Signal Output 4:4-20mA;Power Supply:24VDC;Model:JSD TAM-1004-2141
Electrical Characteristics:

Signs	Item		Test Condition	Min	Type	Max	Units
Isolation characteristics	Isolation voltage		AC,50Hz,(Tested for 1 minute humidity<70%, leakage current < 1mA)		3000		V(rms)
Transmission characteristics	Gain error				1		V/V
	Gain drift Non-linearity				±35		ppm/ºC
	Non-linearity				0.1	0.2	%FSR
Input characteristics	Signal input	voltage		0		15	V
		current		0		30	mA
	Input offset voltage				2	5	mV
	Input impedance	voltage			1		M
		current				50	Ω
Output characteristics	Signal output	voltage		-10		10	V
		current		-20		20	mA
	Load capacity	voltage	Vout=10V		2		kΩ
		current		0	350	500	Ω
	Signal output ripple		Unfiltered		10	20	mVRMS
Power input characteristics	Power supply	Voltage		3.3	12	24	VDC
		Power loss				2	W
		Rage		-10		+10	%
Other  characteristics	operating temperature			-45		85	ºC
	storage temperature			-55		105	ºC
	Weight				145		g
Note:	Normal load ≤ 350Ω, if required load 500Ω, please note when ordering .

Pin Function Description:

Signal Type	Pin	Function Description	Pin	Function Description	Package
Voltage/ Current in	1	Power supply Input +	9	Signal Output + 1	International Standard DIN35 Rail Mounting
	2	Power supply Input -	10	Signal Output - 1
	3	Signal Input + 1	11	Signal Output + 2
	4	Signal Input - 1	12	Signal Output - 2
	5	NC	13	Signal Output + 3
	6	NC	14	Signal Output - 3
	7	NC	15	Signal Output + 4
	8	NC	16	Signal Output - 4

Application Wiring Diagram:


Notes:
1,Please read the user manual carefully before using. If any question please contact our technical support department.
2,Please do not use this product in hazardous area. The power supply of this product should be 24VDC power source. It is forbidden to use 220VAC power supply.
3,Calculating from the date of delivery, during normal use of the product, any quality problems are free repair or replacement by Company during 3 years warranty,
4,To avoid invalid, or any failure, users disassemble this product is forbidden
5,the product is strictly forbidden demolish without permission for not damage
6,All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
7,In this datasheet, all the test methods of indications are based on corporate standards.

Copyright:
Copyright © 2018 Shenzhen Jieshengda Technology Co., Ltd.
Without the prior written permission of the company, any content in this manual may not be copied, distributed, translated or transmitted in any form or method (electronic or mechanical), including photocopying, recording or storing in any information storage and retrieval system. This manual is subject to modification or update without notice.

Trademark
All other trademarks and copyrights belong to their respective owners.