Two-Wire 4-20mA Signal Isolation Amplifier

• Kind: New-Type Transmitter
• Type: DC Transmitter
• Phase: Single
• Wire-Assembly Type: Two-wire Transmitter
• Accuracy Grade: 0.1G
• Certification: CE
• Model NO.: DIN35 1*1 MI 4-20mA
• Customized: Non-Customized
• Input: 4-20mA/0-20mA
• Output: 0-20mA/4-20mA
• High Isolation Voltage: 3000VDC/60s
• High Accuracy: (0.1% F.S, 0.2% F.S)
• Low Temperature Drift: 35ppm
• High Linearity: (0.1% F.S)
• Transport Package: Bubble Bag+Waterproof Bag
• Specification: 94*47*25.5mm
• Trademark: jieshengda
• Origin: Shenzhen
• Production Capacity: 99999

Product Description

two-wire 4-20mA Signal isolation amplifier 
1-input-1-output passive two-wire 4-20mA isolation amplifier isolation transmitter
JIESHENGDA MI Series Analog 4-20mA Signal isolation amplifier Isolation Transmitter
MODEL:DIN35 1*1 MI 4-20mA
Features:
Small size, low cost, No correction directly use
Two-port isolation(input, output)
1-input-1-output
High accuracy(0.1% F.S, 0.2% F.S)
High linearity(0.1% F.S)
High isolation voltage(3000VDC/60S)
Low temperature drift(35PPM/ºC)
Low impedance(voltage drop <3V, 20mA)
Wide Industrial class operation temperature(-45~+85ºC)
Wide voltage input (7.5V-32V)
High reliability (MTBF>50 Wan hour)
Passed CE Certificate
International standard signal input and output(4-20mA/0-20mA)
Application:
DC current/voltage signal isolation, conversion and amplification
Analog signal ground interference suppression and analog isolation, acquisition
4-20mA/0-20mA sensor signal isolation, transformation and signal distribution conversion
Instrumentation and sensor signal transceiver
Two-wire primary/secondary instrumentation signal acquisition and isolation
Power isolation monitoring industrial site
Analog signal data isolation, acquisition, conversion, and distance transmission
Industrial field signal isolation and conversion, and distance transmission without distortion
Power monitoring, medical equipment isolation barrier
Overcome inverter, large motors, power equipment, acquisition systems, DCS and PLC Field interference
General Description:
JIE Sheng Da Technology DIN35 1x1 MI 4-20mA two-wire passive single-channel analog signal isolation transmitter is a signal conditioner with electrical insulation between input and output, it can receive a variety of analog signal from the field instrument, and transmit a standard output signal or user-specified special signal to the control room,PLC,PC or DCS system. The product is isolated between input and output , the isolated voltage is up to 3000VDC .It is widely used in the industrial measurement systems, medical electronic equipment, electrical equipment etc. Adopting high efficiency electromagnetism isolation technology to achieve signal isolation, it is available to keep high output accuracy, good linearity and low temperature drift. For dual-channel isolation transmitter please choose DIN35 2*2 MI 4-20mA series.
Selections and Definitions:

Product Selection Parameter List:
DIN35	1x1	MI	4-20mA	Detailed description
Package Marking Code				Standard DIN35 rail mounting
Channel code				1-input-1-output
Isolation code				Magnetic Isolation Products
current signal Input				4-20mA current signal input
current signal output				4-20mA current signal output

Selection Example:
Example 1: Signal input 1:4-20mA; signal output 1:4-20mA; Model: DIN35 1x1 MI 4-20mA
Example 2: Signal input 1:0-20mA; signal output 1:0-20mA; Model: DIN35 1x1 MI 0-20mA
Electrical Characteristics:

Signs	Item			Test Condition	Min	Typ.	Max	Units
Isolation characteristics	Isolation voltage			AC,50Hz,(Tested for 1 minute humidity<70% ,leakage current < 1mA,)		3000		V(rms)
	Insulation resistance			500VDC(input/output)		100		MΩ
Transmission characteristics	Gain drift					±35		ppm/ºC
	Non-linearity					±0.1	±0.2	%FSR
	Input		current		4	20	30	mA
	Output oououtoutput		current		4		20	mA
	Load capacity		current	RL≤(Us-5)/0.02 Us: Loop power supply voltage		250		Ω
	Frequency Response			small-signal band width,Io=20mA		50		Hz
	Signal output ripple					5	10	mVRMS
Power input characteristics	Power supply	voltage			――	――	――	VDC
		Power loss			――	――	――	W
		Range			――	――	――	%
	operating temperature				-45		85	ºC
	storage temperature				-55		105	ºC
	weight					60		g
	size			94.5*25.5*41				mm
Note	Normal load ≤ 300Ω

Notes:
1,Please read the user manual carefully before using. If any question please contact our technical support department.
2,Please do not use this product in hazardous area. The power supply of this product should be 24VDC power source. It is forbidden to use 220VAC power supply.
3,Calculating from the date of delivery, during normal use of the product, any quality problems are free repair or replacement by Company during 3 years warranty,
4,To avoid invalid, or any failure, users disassemble this product is forbidden
5,the product is strictly forbidden demolish without permission for not damage
6,All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
7,In this datasheet, all the test methods of indications are based on corporate standards.

Copyright:
Copyright © 2018 Shenzhen Jieshengda Technology Co., Ltd.
Without the prior written permission of the company, any content in this manual may not be copied, distributed, translated or transmitted in any form or method (electronic or mechanical).
Including photocopying, recording or storage in any information storage and retrieval system. This manual is subject to modification or update without notice.
trademark
All other trademarks and copyrights belong to their respective owners

 

Pins Function Description:

Outputting types	Pin	Function	Pin	Function	Storage
Single channel passive 4-20mA current output	1	Signal input +	5	NO PIN(NC)	Standard DIN35 rail mounting
	2	Signal input -	6	NO PIN(NC)
	3	NO PIN(NC)	7	Signal output +
	4	NO PIN(NC)	8	Signal output -