1-Input- 1-Output Analog Voltage (current) Signal Isolation Transmitter/Isolation Amplifier

• Kind: Digital Transmitter
• Type: DC Transmitter
• Phase: Single
• Wire-Assembly Type: Four-wire Transmitter
• Accuracy Grade: 0.1G
• Certification: CE
• Model NO.: JSD TA-1001
• Customized: Non-Customized
• Input: 0-3.3V/0-5V/0-10V/1-5V/4-20mA/0-20mA/0-10mA
• Output: 0-3.3V/0-5V/0-10V/1-5V/4-20mA/0-20mA/0-10mA
• Power: 5VDC/12VDC/15VDC/24VDC or 9-36V
• High Accuracy: (0.1% F.S, 0.2% F.S)
• Isolation Voltage: (3000VDC/60s)
• Transport Package: Bubble Bag+Waterproof Bag
• Specification: 115*100*22.5mm
• Trademark: jieshengda
• Origin: Shenzhen
• Production Capacity: 99999

Product Description

1-input- 1-output analog voltage(current)signal isolation transmitter/isolation amplifier
Features:                                                               
Small size, low cost, international standards DIN35mm rail mounting
Three-port isolation (input, output, power supply )
Passed CE Certificate
High accuracy (0.1% F.S, 0.2% F.S)
Full-scale range (<0.2% F.S)
High isolation voltage (3000VDC/60S)
Low temperature drift (100PPM/ºC)
Wide operation temperature (-45~+85ºC)
High reliability (MTBF>50 Wan hour)
Power supply (5VDC/12VDC/15VDC/24VDC multiple choice)
International standard signal input and output (0-3.3V/0-5V/0-10V/1-5V/4-20mA/0-20mA/0-10mA,etc.)
Application:
DC current/voltage signal isolation, conversion and amplification
Industrial field signal isolation and long distance transmission without distortion
Analog signal ground interference suppression and analog isolation ,acquisition ,conversion,and long-distance transmission
4-20mA/0-20mA/0-5V/0-10V sensor signal isolation, transformation and long-distance transmission
Instrumentation and sensor signal transceiver
Power isolation monitoring industrial field
Power monitoring, medical equipment isolation barrier
Overcome interference between instrumentation equipment
General Description:
Jieshengda Technology JSD TA-1001 active 1-in-1-out analog unidirectional signal isolation transmitter is a signal conditioner with electrical insulation between input and output, it can receive a variety of analog signal from the field instrument, and transmit a standard output signal or user-specified special signal to the control room,PLC,PC or DCS. The product is isolated between power supply, input and output, the isolated voltage between them is up to 3000VDC .It is widely used in the power isolation, monitoring and control of industrial site, power monitoring, medical electronic equipment, analog signal isolation and acquisition etc. Adopting optical isolation technology, compared with the electromagnetism isolation transmitter has a stronger anti-EMC electromagnetic interference ,it is available to keep free gain adjustment and zero adjustment ,low temperature drift and good linearity, suitable for using vibration, damp industrial field, the international standard DIN35mm rail mounting, user-friendly installation.
If 1-input-2-output/1-input-3-output/1-input-4-output/2-input-2-output/3-input-3-output isolation transmitter please purchase JSD TA-1002/JSD TA-1003/JSD TA-1004/JSD TA-2002 series and JSD TA-3003 series. AC power supply please purchase the JSD TA-X50X series, two-wire transmitter isolation please purchase JSD TA-1021 series, three-wire isolation transmitter please purchase JSD TA-1031 series

Product Selection Parameter List:
Signal Input Code:					Power Supply Code		Output Signal Code:
Voltage(VDC)			Current(mA)		Power(VDC)		Voltage(VDC)		Current(mA)
1:	0~5V		A:	0~1mA	W:	9~36VDC	1:	4~20mA
2:	0~10V		B:	0~10mA	1:	24VDC	2:	0~20mA
3:	0~75mV		C:	0~20mA	2:	15VDC	3:	0~10mA
4:	0~2.5V		D:	4~20mA	3:	12VDC	4:	0~5V
					4:	5VDC	5:	0~10V
							6:	1~5V
U:	User-defined				U:	User-defined	U:	User-defined
Note1:		When ordering ,please determine input,output and power , special can customize

Selection Example:
Example 1: input : 4-20mA;output :4-20mA; power supply:24VDC;model: JSD TA-1001-D11

Example 2: input :0-10VDC;output :0-5VDC; power supply:5VDC;model: JSD TA-1001-245

Example 3: input : 0-5VDC;output :0-10VDC;power supply:9-36VDC;model: JSD TA-1001-1W5

Example 4: input : 0-3.3VDC;output:0-20mA; power supply:12VDC;model:JSD TA-1001-U32

Example 5: input : 0-10VDC;output:4-20mA; power supply:24VDC;model:JSD TA-1001-211

Electrical Characteristics:

Signs	Item		Test condition	Min	Type	Max	Units
Isolation characteristics	Isolation voltage		AC,50Hz,tested for 1 minute, humidity<70% leakage current < 1mA,)		3000		V(rms)
Transmission characteristics	Gain				1		V/V
	Gain drift				100		ppm/ºC
	Non-linearity				0.1	0.2	%FSR
Input characteristics	Input offset voltage				2	5	mV
	Input impedance	voltage		0.3	1		M
		current		100	250	1000	Ω
Output characteristics	Signal output	voltage		0		10	V
		current		0		20	mA
	Load capacity	voltage	Vout=10V		2		kΩ
		current			350		Ω
	Frequency Response		-3DB		1		KHz
	Response Time				≤ 1		mS
	Signal output ripple		Unfiltered		10	20	mVRMS
	Signal voltage drift		-45~+85ºCoperating temperature			0.2	mV/ºC
Power Supply input characteristics	Power supply	voltage		3.3	24	36	VDC
		Power loss		0.5	1		W
		Range		-10		+10	%
	operating temperature			-45		85	ºC
	storage temperature			-55		105	ºC
	weight				108		g
Note:	normal load≤350Ω,if requiring load is 650Ω, Please note when ordering

Pins function description:

Signal types	Pin	Function	Pin	Function	Storage
Voltage/ Current in	1	Power supply In +	9	Signal Output +	Standard DIN35 Rail  mounting
	2	Power supply In -	10	Signal Output -
	3	Signal Input+	11	No pin (NC)
	4	Signal Input-	12	No pin (NC)
	5	No pin (NC)	13	No pin (NC)
	6	No pin (NC)	14	No pin (NC)
	7	No pin (NC)	15	No pin (NC)
	8	No pin (NC)	16	No pin (NC)

Notes:
1,NC" pin must not be connected to any external circuit, otherwise it will damage the product itself;
2,Please read the user manual carefully before using. If any question please contact our technical support
department.
3,Please do not use this product in hazardous area. The power supply of this product should be 24VDC power source. It is forbidden to use 220VAC power supply.
4,Calculating from the date of delivery, during normal use of the product, any quality problems are free repair or replacement by Company during 3 years warranty,
5,the product is strictly forbidden demolish without permission for not damage
6,All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
7,In this datasheet, all the test methods of indications are based on corporate standards.