4-20mA to 4-20mA Isolation Amplifier

• Kind: New-Type Transmitter
• Type: DC Transmitter
• Phase: Single
• Wire-Assembly Type: Two-wire Transmitter
• Accuracy Grade: 0.1G
• Certification: CE
• Model NO.: JSD TA-1001D-D11
• Customized: Non-Customized
• Input: 4-20mA/0-20mA/0-10V/0-5V
• Output: 0-20mA/4-20mA/0-5V/0-10V
• High Isolation Voltage: 3000VDC/60s
• High Accuracy: (0.1% F.S, 0.2% F.S)
• Low Temperature Drift: 100ppm
• High Linearity: (0.1% F.S)
• Transport Package: Bubble Bag+Waterproof Bag
• Specification: 94*47*25.5mm
• Trademark: jieshengda
• Origin: Shenzhen
• Production Capacity: 99999

Product Description

4-20mA to 4-20mA isolation amplifier
1-input-1-output 4-20mA isolation amplifier isolation transmitter
JIESHENGDA JSD TA-1001D Series Analog 4-20mA Signal isolation amplifier Isolation Transmitter
MODEL:JSD TA-1001D-D11
Features:                                                               
Small size, low cost, international standards DIN35mm rail mounting
Three-port isolation (input, output, power supply and Mutual isolation between channels)
Passed CE Certificate
High accuracy (0.1% F.S, 0.2% F.S)
Full-scale range (<0.2% F.S)
High isolation voltage (3000VDC/60S)
Low temperature drift (100PPM/ºC)
Wide operation temperature (-45~+85ºC)
High reliability (MTBF>50 Wan hour)
Power supply (5VDC/12VDC/15VDC/24VDC multiple choice)
International standard signal input and output (0-5V/0-10V/1-5V/4-20mA/0-20mA, etc.)
Application:
DC current/voltage signal isolation, conversion and amplification
Industrial field signal isolation and long distance transmission without distortion
Analog signal ground interference suppression and analog isolation, acquisition, conversion, and long-distance transmission
4-20mA/0-20mA/0-5V/0-10V sensor signal isolation, transformation and long-distance transmission
Instrumentation and sensor signal transceiver
Power isolation monitoring industrial field
Power monitoring, medical equipment isolation barrier
Overcome interference between instrumentation equipment

General Description:
JIE Sheng da Technology JSD TA-1001D active 1-in-1-out analog signal isolation transmitter is a signal conditioner with electrical insulation between input and output, it can receive a variety of analog signal from the field instrument, and transmit a standard output signal or user-specified special signal to the control room,PLC,PC or DCS. The product is isolated between power supply, input and output, the isolated voltage between them is up to 3000VDC .It is widely used in the power isolation, monitoring and control of industrial site, power monitoring, medical electronic equipment, analog signal isolation and acquisition etc. Adopting optical isolation technology, compared with the electromagnetism isolation transmitter has better anti-EMC electromagnetic interference capability.
If 1-input-2-output/1-input-3-output/1-input-4-output/2-input-2-output/3-input-3-output isolation transmitter please purchase JSD TA-1002/JSD TA-1003/JSD TA-1004/JSD TA-2002 series and JSD TA-3003 series. AC power supply please purchase the JSD TA-X50X series,two-wire transmitter isolation please purchase JSD TA-1021D series, three-wire isolation transmitter please purchase JSD TA-1031D series
Selections and Definitions:

Product Selection Parameter List:
signal input code:		Power supply code:	output signal code:
Voltage(VDC)	Current(mA)	Power(VDC)	Current (mA)	Voltage(VDC)
1:0-5V	A:0-1mA	1:24VDC	1:4-20mA	4:0-5V
2:0-10V	B:0-10mA	2:15VDC	2:0-20mA	5:0-10V
3:0-75mV	C:0-20mA	3:12VDC	3:0-10mA	6:1-5V
4:0-2.5V	D:4-20mA	4:5VDC
U:User-defined		U:User-defined	U:User-defined
Note:When ordering ,please determine input,output and power , special can customize

Selection Example:
Example 1:input:4-20mA;output:4-20mA;power supply:24VDC;model:JSD TA-1001D-D11

Example 2:input:0-3.3VDC;output:0-5VDC;power supply:12VDC;model:JSD-1001D-U34

Example 3:input:4-20mA;output:0-20mA;power supply:24VDC;model:JSD TA-1001D-D12

Electrical Characteristics:

Signs	Item			Test condition	Min		Typ.		Max	Units
Isolation characteristics	Isolation voltage			AC,50Hz,tested for 1 minute, humidity<70% leakage current < 1mA,)			3000			V(rms)
Transmission characteristics	Gain						1			V/V
	Gain drift						100			ppm/ºC
	Non-linearity						0.1		0.2	%FSR
Input characteristics	Input offset voltage						2		5	mV
	Input impedance	voltage			0.3		1			M
		current					250		1000	Ω
Output characteristics	Signal output	voltage			0				10	V
		current			0				20	mA
	Load capacity	voltage		Vout=10V			2			kΩ
		current			0		350		650	Ω
	Frequency Response			-3DB			1			KHz
	Response Time						≤ 1			mS
	Signal output ripple			Unfiltered			10		20	mVRMS
	Signal voltage drift			-45-+85ºC					0.2	mV/ºC
Power Supply input characteristics	Power supply		voltage		3.3		12		24	VDC
			Power loss				0.5		1	W
			Range		-10				+10	%
	operating temperature				-45				85	ºC
	storage temperature				-55				105	ºC
	SIZE				94.5*25.5*41					mm
	weight					60				g
Note:	normal load≤350Ω,if requiring load is 650Ω, Please note when ordering

Pins function description:

Signal types	Pin	Function	Pin	Function	storage
Voltage (Current) in/out	1	Signal Input+	5	Signal Output +	Standard DIN35 Rail  mounting
	2	Signal Input-	6	Signal Output -
	3	No pin (NC)	7	Power supply In +
	4	No pin (NC)	8	Power supply In -

Application Wiring Diagram:



Notes:
1,Please read the user manual carefully before using. If any question please contact our technical support department.
2,Please do not use this product in hazardous area. The power supply of this product should be 24VDC power source. It is forbidden to use 220VAC power supply.
3,Calculating from the date of delivery, during normal use of the product, any quality problems are free repair or replacement by Company during 3 years warranty,
4,To avoid invalid, or any failure, users disassemble this product is forbidden
5,the product is strictly forbidden demolish without permission for not damage
6,All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
7,In this datasheet, all the test methods of indications are based on corporate standards.

Copyright:
Copyright © 2018 Shenzhen Jieshengda Technology Co., Ltd.
Without the prior written permission of the company, any content in this manual may not be copied, distributed, translated or transmitted in any form or method (electronic or mechanical).
Including photocopying, recording or storage in any information storage and retrieval system. This manual is subject to modification or update without notice.
trademark
All other trademarks and copyrights belong to their respective owners